CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
(62 reviews)
Price: $85.02
In Stock
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide
Item # CE31013G
Retail:$89.41
Our Price: $85.02
You Save: 5%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (62)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE31013G
- Winch Stand
- 30 Inch Tall
- 2 Inch Wide
- CE Smith
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.
Features:
- Heavy-duty winch stand supports a winch on your trailer's 2" tongue
- 14 Mounting holes allow you to adjust height of winch during installation
- Sturdy, hot-dipped galvanized, 12-gauge steel construction
- Made in the USA
Specs:
- Application: 2" trailer tongues
- Dimensions: 30" tall x 2" wide
This winch stand mounts on your trailer by clamping around the 2" wide tongue. The holes on the base provide multiple mounting options and angles, and the surface where you mount the winch is slightly angled to help with winch operation.
Hot Dipped Galvanized Steel
Hot dipped galvanized steel parts are stamped from a sheet of steel. The edges of the galvanized parts often lose their zinc coating during the stamping process. Because of the thinness of the coating (less than 1 mil) and the fact that the edges remain exposed, galvanized parts can begin to oxidize and rust quickly, so it's recommended that they be primed and painted.
CE31013G 12-Gauge, Galvanized Steel Winch Stand by CE Smith - 30" Tall x 2" Wide
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide - CE31013G
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
This heavy-duty stand gives you the freedom to mount a winch wherever you choose on your trailer's 2" tongue. Its 14 mounting holes allow you to adjust the height of your winch. Made of hot-dipped galvanized, 12-gauge steel.by: Bob 03/29/2024
This device fit perfectly on my Malone kayak trailer which I am converting to accommodate my float boat. It installed easily with (4) 3/8 bolts
by: Barry10/28/2021
PERFECT. This was exactly what I was looking for and didn't know if it existed. My Kayak Trailer is a bit smaller than regular boat trailers,this extension for my winch means I can Fish for a bit longer without throwing my back out moving my BONAFIDE SS127 around. Thanks for being Forward thinking and helping us in making Kayak Fishing The New Thing. Thanks guys, I will send some pictures of the modification.
by: Michael06/02/2019
I haul my whitewater raft (it is a cataraft) on my utility trailer and I needed a winch mount that was strong and gave me some elevation above the trailer tongue. This was the perfect solution. It only took me a few minutes to mount with four 3 inch by 3/8" bolts (not included). This winch mount was inexpensive, simple, feels really solid and seems to be working perfectly. eTrailer is always great to do business with.
by: Patrick 12/03/2023
Quality parts at competitive prices.
by: Andrew 10/08/2023
Fairly priced Timely Delivery
by: Patrick 06/08/2021
This is very sturdy. I put a winch on it to pull a small aluminum boat onto a trailer and have no problems. It does exactly what it is supposed to do. I would buy again but doubt I will have to.
by: Mark 06/27/2023
Works great.
Easy to install.
Just what I needed!
by: Kenneth05/27/2016
This winch stand was perfect for my needs. I had tried fabricating one before I found etrailer.com. Sure makes the job easier when you have the right parts.
Kenneth
1/26/2018
All working well, thanks.
by: Jeff 09/25/2022
Needed this for a small trailer. Perfect ! Existing holes almost did the whole job. I only had to drill two new holes.
by: Roger B. 10/30/2015
This is the third or fourth order I have placed with e-trailer, and each time they have packaged the items correctly and they have been recieved in the suggested amount of time, with no damage or loss; exactly what I ordered. i would highly recommend this company. Roger B.
by: James10/27/2017
Customer had an accident and damaged trailer. Winch stand, bow roller mount and rubber bow wedge were all as described fit great and my order was filled and shipped quickly. Very pleased with products and service.
by: Jay08/20/2018
As always, and easy, pleasurable shopping experience with etrailer! Not only do they ship out quickly and send you exactly what you ordered, but their customer service and follow up is unmatched!
by: lee09/03/2013
Product was on backorder. Waited more than three weeks. It was worth it. It was durable, well made except it missed one hole on one side and I have to drill a hole so the bolt can go through from one side to the other.
by: Martin D.01/23/2014
Seems to be a durable products ( CE31013G) and (CE31005PG) but no installation tips instructions included. No hardware. Should provide hardware size/type information.
by: Dave L01/19/2016
This product arrived on time and is just what I need to repair my broken snowmobile trailer. Great communication from George about the timing of shipping.
by: Donald J05/02/2020
Solved a space problem with winch post that came on trailer.
by: Kathryn 09/15/2021
Very good quality. Fits my trailer perfectly. Everything the website said that it was. Delivered three days BEFORE the delivery date!!
by: Steve T10/26/2019
Part worked as it should. Was a bit tall for my application, but not a serious problem.
by: neil07/04/2015
Works great for mounting on a raft trailer. Well built will need to finish so it doesn't rust, but otherwise does what it is supposed to.
by: Aaron 05/05/2021
Works great... would be nice to get with hardware to attach it but a great product
by: Justin09/02/2015
Much heavier and more stout than expected. Should be able to withstand the hardest hits when driving the boat on the trailer.
by: James04/16/2018
This company has the best pricing online and everything u need for a trailer. Will do business in the future. Thanks etrailers.
by: Heath03/05/2018
Everything looks good so far just opened the boxes.
by: Stephanie04/25/2022
Stand is solid and exactly what my husband needed to complete his trailer. Delivery was much faster then I expected as well!
by: Zan08/15/2018
Everything was spotted as promised. The product fit the trailer I am building. Very happy with the product and the purchasing process
25
62
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- Fit of CE Smith Winch Stand # CE31013G on 2 Inch Wide Trailer TongueThe CE Smith Winch Stand you mentioned, part # CE31013PG is designed for 2 inch wide trailer frame members. The stand would fit and work well on your 2 inch wide by 4 inch deep trailer tongue.
view full answer... - Winch Stand to Install Winch onto Boat TrailerIt sounds like you're looking for the CE Smith Winch Stand # CE31013G. This is a stand that your winch will mount to anywhere on your trailer's tongue. It gives you multiple mounting angles and options with 14 mounting holes. It fits 2 inch trailer tongues and is 30 inches tall. If you also need a winch or bow stop I've linked our selections for you to take a look at.
view full answer... - How To Convert a Boat Trailer from Center Rollers to Bunk RollersYes, it is possible to switch from center rollers to bunk rollers on a boat trailer. For this, you will first need to remove the center rollers and then you can install a set of bunk rollers, part # CE27710 along with part # CE10000G-4 to support the hull. Then, in order to support both the port and starboard sides you can use part # CE27600. I have attached a photo of a similar setup with bunk boards instead of bunk rollers for the hull. In addition to the above you will also need to...
view full answer...
- Will CE Smith Winch Stand Fit a 2 Inch Wide and 3-1/2 Inch Tall Trailer FrameThe height of the frame does not matter, just the width. So with a 2 inch wide frame you can install CE Smith Winch Stand # CE31013G.
view full answer... - Will The Dutton-Lainson Winch Work For Loading a 600 LB Motorcycle on Trailer with DrillThe winch you referenced is the Dutton-Lainson Winch, part # DL14730. It has a capacity of 2000 lbs, so it will certainly handle the 600 lbs you mentioned the motorcycle weighs. This winch features a reversible ratchet, hand brake, and has a quick attach handle. I would also recommend the Hand Winch Strap with Safety Hook, part # DL24249. This strap is 2 inches wide and 25 feet long, and has the safety hook attached. The strap has a capacity of 2600 lbs. This combination does not have...
view full answer... - Can Winch be Added to Malone LowBed MicroSport TrailerNot ridiculous at all; you can add a winch to the Malone LowBed MicroSport Trailer for 2 Heavy Kayaks # MAL25FR. Just use the CE Smith Winch Stand # CE31013G and Buyers Products Trailer Hand Winch # 337HW800S.
view full answer... - Size of Mounting Holes on Base of CE Smith Galvanized Winch Stand CE31013GThe mounting holes on the bottom of the CE Smith Galvanized Winch Stand # CE31013G measure 7/16-inch. Please refer to the linked photo. This 30-inch tall winch stand is made of 12-gauge steel and is intended for 2-inch trailer tongues. It is USA-made.
view full answer...
- Does the CE Smith Winch Stand have a Capacity The CE Smith winch stand, # CE31013G, does not have a listed capacity. The stand is made of 12 gauge steel so 500 pounds of weight would not be a problem for it.
view full answer... - Recommended Winch Stand and Winch for Boat Trailer with Hobie Kayak The only winch post option we offer is the CE Smith Winch Stand part # CE31013G which is designed for 2" trailer tongues. This will then allow you to mount a winch like the Fulton Single Speed Trailer Winch part # F142102 which is what I recommend. It comes with the strap pre-installed.
view full answer... - Recommended Winch Stand For Flat Trailer With Single Beam TongueThe winch post we offer is part # CE31013G, and the typical installation for this is on a boat trailer. This post measures 30-inches tall and is designed for 2-inch wide trailer frames. It is made of 12-gauge steel and it has 14 mounting holes. I have attached a photo of the winch stand you can check out. There are mounting holes at the bottom of the stand that can be used to attach to your trailer tongue. You can use bolts and just remove the entire stand when you want to carry different...
view full answer...
- Availability of Part Number 31013Hey Lou, so we have two replacement parts that reference the number 31013. We have the winch stand part # CE31013G and the Curt front hitch # C31013. Do you have something different?
view full answer... - Picture of CE Smith Winch Stand # CE31013G Installed on TrailerI attached a picture that we recieved from a customer that shows the CE Smith winch mount # CE31013G installed and in use on a trailer for you to check out.
view full answer...
- Parts Needed For A Spartan SB140 Boat TrailerYes, I can help you find parts for your Spartan SB140 boat trailer. I will start with the winch. The 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 lbs, part # 315-W3200D, is a 2-speed manual winch. It can winch up to 3,200 lbs. It will attach directly to the winch stand. The CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide, part # CE31013G, is a perfect addition to mount your winch to on your boat trailer. It will mount onto your boat trailers 2" tongue. Once...
view full answer... - Recommended Winch and Mounting Bracket for a Malone Microsport TrailerYes, you can add a winch to the Malone LowBed MicroSport Trailer item # MPG464-LB. You will want to use the CE Smith Winch Stand item # CE31013G. This will fit on the Malone trailer's 2" tongue. This stand is 30" tall and made of galvanized steel. I recommend using the MaxxTow MaxxHaul Hand Winch item # MT50156. This winch has a 20' strap and a 1,200 lbs capacity. To upgrade the tires you will want the Kenda Karrier S-Trail ST145/R12 Radial Trailer Tire item # AM10130. This is a class...
view full answer... - Recommended Trailer for a 16ft inflatable Fishskiff BoatI have a solution for you but the CE Smith Multi Sport Plus Boat and Kayak Trailer item # CE48870 is not suitable for your 16' SeaEagle Inflatable Fishskiff. That trailer can only carry a boat up to 14' and as you pointed at it is quite a bit more narrow. I recommend the Malone MegaSport Kayak Trailer item # MPG535. This trailer can handle boats up to 20' long and has 86" wide crossbars. I have linked a review video below. You will want to add the Bunk Kit for Malone Trailers item #...
view full answer... - Availability of Vertical Winch Mounting PostThe closest option we have to what you are looking for is the CE Smith Winch Stand part # CE31013G which gives you a slightly angled back winch stand that can attach to your boat trailer tongue. This is overall 30 inches tall and 2 inches wide.
view full answer... - How Does the CE Smith Winch Stand # CE31013G Mount to TrailerTo mount the CE Smith Winch Stand # CE31013G on a trailer requires you to slip the lower portion with the holes drilled through it over the pole tongue of your trailer. The various holes are there to allow you to match the correct height and angle that the trailer calls for. I attached a picture of a similar product that uses basically the same style of attachment to help you visualize how the stand would mount. You would need to provide nuts and bolts that would be long enough to pass...
view full answer...
- Winch Stand Recommendation for a Fulton F2 WinchThe winch stand you see in the attached review video for the Fulton F2 Fully Enclosed Trailer Winch # FW16000101 was already on there when we installed the winch in the video, so it isn't anything that we sell. If you're in the market for a winch stand then I recommend checking out the CE Smith Winch Stand # CE31013G to pair with the F2 winch you're looking at.
view full answer... - Recommended Winch Post/Stand For Boat Trailer With Roller StopIt sounds like you are looking for the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. This is designed for a 2 inch by 3 inch frame, so you will need to make some modifications. This is the only winch stand we currently carry. You may also be interested in the Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches # DL24059 and the CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Yellow TPR # CE32015G.
view full answer... - Can Winch Be Added to Malone EcoLight Sport TrailerSince the Malone EcoLight trailer part # MAL53FR has a tongue width of 2 inches you could use the tower kit part # CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part # 337HW800S.
view full answer... - Recommended Boat Trailer Parts to Add 18 Foot Freighter Canoe Support to UTV Flat Bed TrailerYou would basically need to build a frame that you can attach to the flat bed trailer. I recommend using the following: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair # CE27840 CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 # CE10000G-4 CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G CE Smith Keel Roller Assembly for 2" Wide Trailer Tongues - Galvanized Steel and Black Rubber # CE32005G Fulton Single Speed Trailer...
view full answer... - Recommended Winch Stand And Mount For 1998 Nitro Boat TrailerFor your 1998 Nitro Trailer, I recommend the CE Smith Winch Stand - Galvanized Steel - 30" Tall x 2" Wide # CE31013G. You can then use the Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson # DL24110 if you want a different mounting for the winch.
view full answer... - Looking for a Replacement Handle for a Knott Autoflex Hand WinchIf you were looking for a replacement handle, the hole opening on the Replacement Quick Attach Winch Handle for Dutton Lainson Winch - 9-1/2" # DL70330 will measure 15/32" by 5/8" and looks like it will be a good replacement for your Knott Autoflex winch. I do suggest measuring to confirm this though. However, if you are referring to the shaft/handle to change from one speed to the other, you will need to contact Knott directly. This is not a winch we carry so I cannot say if any of our...
view full answer...
- Replacement for Knott 6S5810.001 AutoFlex 2500 lb 2-Speed Trailer WinchWe don't carry the Knot Autoflex couplers, but we do have a solution that could work for you. You could assemble a solution of parts we offer that would consist of: • JIF Marine 2500 lb 2-speed hand winch, part # 315-W2500D • Winch Stand, part # CE31013G which is compatible with 2 inch wide pole tongues • Bow Roller Bracket, part # CE31005PG • 3 Inch Bow Roller, part # YR300B-325B
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Written by:
DeAnne T
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Patrick
6/9/2022
Part looks and works like the day I installed it. Exactly what I needed.